UI Help Center - Page 126

Lorienne · 03/31/09, 11:58 AM

Originally Posted by phasedweasel

Is there any way to have Bartender4 hide a bar unless you either depress a modifier (shift, ctrl, etc) or toggle something? I use one bar as a large panel of click only buttons (such as my crafting, weapon imbues), abilities that I only want to use rarely. I'd like to hide the bar at all times and display it briefly when I want one of the skills, but I cannot find how to do this. I see Bartender4 has several options for visibility, but I do not know how to operate the custom conditionals. Any advice?

You can have the bar with the abilities fade out. It's the "Fade Out" option on this menu. Just change the Alpha slider all the way down to 0, and the bar will completely hide until mouseover.

Mixe · 03/31/09, 12:05 PM

My UI

I'm looking for a way to put somewhere in the middle the time left remaining on my Judgement on my Focus' target (mostly for raid bosses). I tried doing this through Xperl but I couldn't seem to find adequate settings using the 'big buff' options on my Focus Target (this is situated middle-bottom of my UI).

If anyone could help me with this slight issue, I would be very grateful.

Silmemir · 03/31/09, 1:40 PM

e: resolved myself. Ignore or delete please.

Ajuga · 03/31/09, 3:00 PM

Originally Posted by phasedweasel

Is there any way to have Bartender4 hide a bar unless you either depress a modifier (shift, ctrl, etc) or toggle something? I use one bar as a large panel of click only buttons (such as my crafting, weapon imbues), abilities that I only want to use rarely. I'd like to hide the bar at all times and display it briefly when I want one of the skills, but I cannot find how to do this. I see Bartender4 has several options for visibility, but I do not know how to operate the custom conditionals. Any advice?

The custom conditionals are fairly simple to code. If you don't know how to start you can just 'Copy Conditionals' and you'll have something to start with. After that it's just a matter of picking the right conditionals - just like when you write macros (Macro guide).

Anyway, I believe you're looking for something like this:

[mod] show; hide

Although if you use modifiers for you common used spells this will make the bar flicker a lot. Perhaps using just ALT as modifier works for you:

[mod:alt] show; hide

tjfria · 03/31/09, 4:11 PM

Originally Posted by Mixe

My UI

I'm looking for a way to put somewhere in the middle the time left remaining on my Judgement on my Focus' target (mostly for raid bosses). I tried doing this through Xperl but I couldn't seem to find adequate settings using the 'big buff' options on my Focus Target (this is situated middle-bottom of my UI).

If anyone could help me with this slight issue, I would be very grateful.

Have you tried "ClassTimer"?

Obliterate · 04/01/09, 4:04 AM

Pit Bull:

I have created raid frames with this addon, when I do raids a couple of players have a name like "Darkdeathnight", this is an huge name and this is bigger of frame. There is any configuration to set names to not show more than "X" letters per name? Thanks.

Sorry for ugly english.

Duilliath · 04/01/09, 7:27 AM

Originally Posted by Obliterate

Pit Bull:There is any configuration to set names to not show more than "X" letters per name?

Look at the old DogTags3.0 thread. There's ways to either truncate names, or abbreviate them. I do believe it's near the start of the thread, so likely no need to wade through all of it.

supplicium · 04/01/09, 2:48 PM

I'm looking for a script to run in a macro to open the bigwigs range check if it doesn't open and/or want to use it on another fight.

Jujusticier · 04/02/09, 4:34 AM

Hi guys,

I am looking for a bar addon which monitor specific buff or debuff as doesNeedtoKnow, but based on spell ID and not the buff names.

I want to be able to see Sacred shield buff (53601) from Sacred shield proc(58597).

Does any paladins found something to monitor Sacred buff proc?

Thanks in advance

Rheinfire · 04/02/09, 10:28 AM

Hi,

for my deathknight frost tank i´m searching scales for the compare addon PAWN. For sure you know it. I´ve searched the whole web but i found nothing suitible.

I trust in your abilities to solve this problem. Your site is great!

Thx, cu later.

Shazra · 04/02/09, 12:25 PM

Does anyone know of a simple mod that would just display my current spell dmg number on my screen during combat, without opening up my character sheet. I saw something similar a long time ago that displayed AP for melee classes but I cant find it now.

Basically, I'd like to be able to quickly glance down to monitor my current +dmg, or even better for the mod to calculate the value that Demonic Pact is giving.

Rott · 04/02/09, 2:03 PM

Originally Posted by Shazra

Does anyone know of a simple mod that would just display my current spell dmg number on my screen during combat, without opening up my character sheet. I saw something similar a long time ago that displayed AP for melee classes but I cant find it now.

Basically, I'd like to be able to quickly glance down to monitor my current +dmg, or even better for the mod to calculate the value that Demonic Pact is giving.

SLDT is what you are looking for. There are also other add-ons that perform the same function.

Szarach · 04/05/09, 7:29 PM

I'm trying to set Power Auras to display a graphic when neither Horn of Winter or Strength of Earth VIII are present. I can get it to do either or, but cannot get it on the same graphic. Is this possible to do?

Feist-Mok · 04/06/09, 12:40 AM

Originally Posted by Szarach

I'm trying to set Power Auras to display a graphic when neither Horn of Winter or Strength of Earth VIII are present. I can get it to do either or, but cannot get it on the same graphic. Is this possible to do?

You could always just make the image for both identical, and put them on the same exact spot.

My own question:

I've recently swapped to Bison : WoWInterface Downloads : Buff/Debuff/Spell Mods for my buff display, and like it well enough, but it seems to have developed the wierdest and most annoying bug in the 48 hours since I first installed it. Namely, in the weapon buff frame, it thinks my OH is my MH and vice versa. I.E. it displays my MH weapon to the right and the OH to the left. I've found setting the 'horizontal space' to negative to be a quick fix, and things at least look right, but the MH weapon is still in the frame labelled OH in the config. Any idea what could've caused that?

Marieth · 04/06/09, 4:56 AM

Originally Posted by Jujusticier

Hi guys,

I am looking for a bar addon which monitor specific buff or debuff as doesNeedtoKnow, but based on spell ID and not the buff names.

I want to be able to see Sacred shield buff (53601) from Sacred shield proc(58597).

Does any paladins found something to monitor Sacred buff proc?

Thanks in advance

Have a look at sFilter2.
It is the bar version of sFilter.

You do not have to afraid to modify the lua. There is no ingame configuration, but you can track about everything you want, as long as you have a spellID.
The configuration in the lua is pretty easy and well documented in the file itself.